CV-OPCSAEOPC报警与事件服务器

产品标题:CV-OPCSAEOPC报警与事件服务器

型号： CV-OPCSAE

品牌：霍尼韦尔

                                                       产品详情资料：

拔出或重新插入继电器之前，关闭控制电源，以防止误操作！如果试图将装置安装到不匹配的外壳中，机械钥匙将阻止装置完全插入。在以下步骤中不要用力，否则可能会造成损坏。要从机箱中卸下单元：1。抓住右侧的中心，然后拉动盖子，打开盖子，盖子将围绕左侧的铰链旋转。2.用螺丝刀向上按压锁闩，松开位于锁柄下方的锁闩。

通常情况下，469装置在出厂时安装在外壳中，在将外壳安装在支撑面板中之前，应将其拆下。下一节将描述单元的撤回。图2-4：单469和双469切割面板准备好面板中的安装孔后，从前面将469外壳滑入面板。在前面板上施加牢固的压力，以确保前挡板紧贴面板的前部，如下图所示，从外壳的每一侧弯曲一对固定凸舌（至水平位置）。机箱现已牢固安装，可用于面板布线。如果需要额外的支撑，可以订购SR可选安装套件。

                         产品英文详情资料：

TURN OFF CONTROL POWER BEFORE DRAWING OUT OR RE-INSERTING THE RELAY TO PREVENT MALOPERATION! If an attempt is made to install a unit into a non-matching case, the mechanical key will prevent full insertion of the unit. Do not apply strong force in the following step or damage may result. To remove the unit from the case: 1. Open the cover by grasping the center of the right side and then pulling the cover, which will rotate about the hinges on the left. 2. Release the locking latch, located below the locking handle, by pressing upward on the latch with the tip of a screwdriver.

Normally the 469 unit is mounted in its case when shipped from the factory, and should be removed before mounting the case in the supporting panel. Unit withdrawal is described in the next section. Figure 2–4: SINGLE AND DOUBLE 469 CUTOUT PANELS After the mounting hole in the panel has been prepared, slide the 469 case into the panel from the front. Applying firm pressure on the front to ensure the front bezel fits snugly against the front of the panel, bend out the pair of retaining tabs (to a horizontal position) from each side of the case as shown below. The case is now securely mounted, ready for panel wiring. If additional support is desired, the SR optional mounting kit may be ordered.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。