背景墙内墙外墙装饰板材泡沫铝

Alusion™ is produced by Cymat Technologies Ltd, based in Toronto, Canada. An innovative materials  technology company, which has exclusive worldwide rights, for producing Alusion™ Stabilized Aluminum  Foam, through patents and licenses. Alusion™ creates strong yet lightweight panels which are similar in  appearance to a metallic sponge. Alusion™ is visually striking, with a modern dramatic look.  • Alusion™ panels are available in Small, Mid & Large cell version types. • The top and bottom surfaces of the Alusion™ panels come in two finishes - “Natural” which has  a natural metallic skin or “Open” which exposes the cells on the panel surface.  • Each side of our panels look different due to our continuous casting production process. The  side which touches the conveyor belt during production, becomes much shinier. This is why it is  also called “the bottom side”. • Standard Panel sizes: 1220 mm W x 2440 mm L (4’ X 8’), 1220 W mm x 3048 mm L (4’ x 10’),  1220 mm W x 3660 mm L (4’ x 12’). Longer custom panels available for special orders. Panels  are available in a standard 1220 mm width (4 ft). • Standard Thicknesses: 12.7mm (1/2”) & 25.4mm (1”) or in a 43.2mm (1.7”) thickness for large  cell panels only. Custom thicknesses also available, but the thinnest architectural material is  available in a 12.7 mm. However, the large cell natural material is available in a 9.5 mm  thickness, for industrial applications. • By offering a custom thickness, the cell size is also customizable in size (foam bubbles or cells). • Our Alusion™ material can be custom smoothened on the surface of each panel, as a custom  service, or can be prepared at the time of installation, by the applicator. • Custom sizes and shapes can be produced for special orders. Notches, or any type of design cuts  must be performed with laser cutting. This service is available by Cymat, but most times this  work is done by our contractors. Panels can also be custom cut to size. • Aluminum foam panels are not structural. • Alusion™ will never mold or mildew. • Bugs do not live in aluminum foam (example spiders, bees etc.) • Maintenance guide available upon request. Aluminum naturally repels dust, so dust does not  collect on the surface of the Alusion panels (no specific maintenance is required). The panels  always stay clean, even after years after being installed. For exterior facades, which include  powder coated material, a maintenance regime is usually recommended by the manufacturers of the powder coatings.  • Alusion™ can be acrylic or glass coated (Ultra UV resistant). For high traffic areas, the large cell  material is usually protected with glass, or acrylic sheets. Standoffs can also be used, either  placed through the panel, or adhered behind the panel (for large cell transparent type of  applications, example LED back-lit panels etc.). • For back lit LED Alusion™ panels, please keep in mind that the 25.4 mm thick material (1”) ALFG-25.4-LG-2S is more translucent than the 12.7 mm thick large cell material (1/2”) ALFG- 12.7-LG-2S. • If Alusion™ is to be used as a flooring application, a thick epoxy layer would need to be applied  onto the surface of the panels. This work is done through third-party companies. • Powder coating or BASF wet paints available in limitless colours for exterior and interior  applications, and can also be matched to RAL colour tones. (4084 hrs of continuous salt spray  testing has been performed, and has had no affect on our material, testing available upon  demand). • Special powder coats can be applied onto Alusion™, which render the surface salt resistant  and/or chemically resistant.  • Special trims are available by partnering companies, on demand (corner trims etc., as well as  custom aluminum trims which look identical to the surface of the aluminum foam panels). • Alusion™ can be bent cold by using a 3 roller bending machine or by using heat on the back  surface of the panels (for 3 roller bending, great care must be taken and operator must be  patient in their approach, as each increment of curvature must be small enough to avoid  cracking on the convex surface. Instructions are available on PDF format). • Designs and shapes can be added onto our panels, example waves, lines, letters etc.  • Hanging our material: Due to the aluminum foam panels being so light in weight, for exteriors,  our façade fabricators will simply adhere them directly onto their metal frame systems (along  with girts behind the Alusion panel). For most interior applications, sub contractors will adhere them onto 3 vertical standard furring strips (along with 3M’s DP 8407NS structural adhesive).  DESIGN GUIDE is available, upon demand.  • Wind load testing available, ASTM E330-10 (Up to 5930 Pa, 221 mph, 355 kmph) • In order to optimize crating & freight costs for larger orders, we recommend a length of 2820  mm or 3580 mm. Aluminum flakes: due to movement on shipping, you may notice a few aluminum flakes; this is  due to the water blasting process employed on open cell panels which results in some small  particles being imbedded in the cells of the foam. This does not occur after installation of our  panels.  SPECIFICATION SHEETS available upon demand: Surface Burn – ASTM E84, Salt Spray – ASTM E3043, and AAMA 2604 for powder coated  material (exteriors), Thermal-Aged Flexure Strength ASMT E3043, Compressive Strength ASTM  E9, Impact Resistance ASTM E2486 & Tensile Report ASTM B557, Transverse Load ASTM E72-5 &  Acoustic ASTM C423 (UP to 1 NRC, pending version selected), Mold & Mildew (100% mold and  mildew free) & Fire (A1 Non combustible – Flame spread “0”), Contributes to LEED Certification  points, up to 100% recycled content and 100% recyclable, Luminance report etc. THANK YOU FOR YOUR SUPPORT OF OUR ALUSION™ PRODUCT. Sole Manufacturer:  Cymat Technologies Ltd.  6320 Danville Rd, Mississauga, Ontario 13917996526 or dial the direct line for Sales at 13917996526  cymat@qq.com   www.alusion.com www.cy