一分钟学会铝单板的知识

装饰材料中的铝单板，其中有铝单板吊顶和幕墙铝单板，今天建威厂家跟大家分享的是铝单板吊顶施工和室内铝单板。

The aluminum veneer in decorative materials, including aluminum veneer ceiling and curtain wall aluminum veneer, today what Jian Wei manufacturers want to share with you are the aluminum veneer ceiling construction and indoor aluminum veneer.

铝单板的施工：1、首先确定施工部位，测量设计标高和实际标高是否相

符。根据确认下来的准确的1M线，在墙面上弹确定后的标高线。

Construction of aluminum veneer: 1. Firstly, the construction site should be determined, and whether the design elevation corresponds to the actual elevation . According to the confirmed accurate 1M line, mark the definite elevation line on the wall surface.

2、吊杆采用钢筋吊杆，吊杆间距800-1000mm,固定吊杆的膨胀螺栓螺栓应完全拉紧，不能松动。

2. The suspender should be made of reinforced bar, the spacing between boom is 800-1000mm, and the expansion bolt and bolt of the fixed boom shall be fully tensioned and not loose.

3、在安装龙骨前设置反支撑或转换层。

. Install the back support or transfer layer before installing the keel.

4、安装龙骨前，应按设计要求对房间净高、洞口标高和吊顶内管道、设备及其支架的标高进行交接检验。

4, Before installing of the keel, the design requirements of the room clear height, the hole elevation and the ceiling inside the pipes ,equipment and support’s elevation should be transfered and tested.

5、重型灯具及其他重型设备严禁安装在吊顶工程的龙骨上。

5、heavy lamps and other heavy equipment should not be installed on the keel of the ceiling works.

6、安装孔角龙骨时应起拱，一般为短跨的1/200，墙边第一根孔角龙骨距墙壁边缘≤200mm，接头要错开，不可与相邻龙骨接头在一条直线上，吊杆的方向也要错开。

6, the installation hole angle keel should be arch, which is usually short span of 1/200, the first hole angle keel from the wall edge is less than or equal to 200mm, the joint should be staggered,should not joint in a straight line with the adjacent keel, the direction is to stagger.

室内铝单板：

indoor aluminum veneer

1、室内包柱铝单板弧形优美，色泽均匀，工艺复杂。

1, Indoor column aluminum veneer has arc beautiful, uniform color, complex process.

2、室内幕墙铝单板色泽均匀，颜色亮丽，，经久。

2、Indoor curtain wall aluminum veneer has uniform and bright color, quality assurance and can stand wear and tear.

3、室内密拼铝单板无缝拼装，视觉，质量轻，强度大，刚性强。

Indoor seamless aluminum veneer has seamless assembly, visual perfect, light quality, high strength, strong rigidity.

 佛山建威铝单板厂家是专业生产和销售铝单板，如果您想了解更多铝单板产品，请点击登录建威官网：http://www.fsjwlth.com或咨询我们的业务经理罗小姐，她的电话/微信：13924844954

Foshan Jian Wei aluminum veneer factory is specialized in the production and sale  aluminum veneer, if you want to know more about the aluminum veneer production, please click on the website: http://www.fsjwlth.com.Or consult our business manager, Miss Luo, on her phone / WeChat: 13924844954